Squid configuration directive dns_packet_max

Available in: v7   v6   v5   v4   3.5   3.4   3.3   3.2  

For older versions than v4 see the linked pages above

Configuration Details:

Option Name:dns_packet_max
Default Value:EDNS disabled
Suggested Config:

	Maximum number of bytes packet size to advertise via EDNS.
	Set to "none" to disable EDNS large packet support.

	For legacy reasons DNS UDP replies will default to 512 bytes which
	is too small for many responses. EDNS provides a means for Squid to
	negotiate receiving larger responses back immediately without having
	to failover with repeat requests. Responses larger than this limit
	will retain the old behaviour of failover to TCP DNS.

	Squid has no real fixed limit internally, but allowing packet sizes
	over 1500 bytes requires network jumbogram support and is usually not

	WARNING: The RFC also indicates that some older resolvers will reply
	with failure of the whole request if the extension is added. Some
	resolvers have already been identified which will reply with mangled
	EDNS response on occasion. Usually in response to many-KB jumbogram
	sizes being advertised by Squid.
	Squid will currently treat these both as an unable-to-resolve domain
	even if it would be resolvable without EDNS.








Web Site Translations