#	WELCOME TO SQUID 1.2
#	--------------------
#
#	This is the default Squid configuration file. You may wish
#	to look at http://cache.is.co.za/squid/ for documentation,
#	or the Squid home page (http://squid.nlanr.net/) for the FAQ.
#


# NETWORK OPTIONS
# -----------------------------------------------------------------------------

#  TAG: http_port
#	The port number where Squid will listen for HTTP client
#	requests.  Default is 3128, for httpd-accel mode use port 80.
#	May be overridden with -a on the command line.
#
#	You may specify multiple ports here, but they MUST all be on
#	a single line.
#
http_port 3128

#  TAG: icp_port
#	The port number where Squid sends and receives ICP requests to
#	and from neighbor caches.  Default is 3130.  To disable use
#	"0".  May be overridden with -u on the command line.
#
#icp_port 3130

#  TAG: htcp_port
#	The port number where Squid sends and receives ICP requests to
#	and from neighbor caches.  Default is 4827.  To disable use
#	"0".
#
#htcp_port 4827

#  TAG: mcast_groups
#	This tag specifies a list of multicast groups which your server
#	should join to receive multicasted ICP requests.
#
#	NOTE!  Be very careful what you put here!  Be sure you
#	understand the difference between an ICP _query_ and an ICP
#	_reply_.  This option is to be set only if you want to RECEIVE
#	multicast queries.  Do NOT set this option to SEND multicast
#	ICP (use cache_peer for that).  ICP replies are always sent via
#	unicast, so this option does not affect whether or not you will
#	receive replies from multicast group members.
#
#	You must be very careful to NOT use a multicast address which
#	is already in use by another group of caches.  NLANR has been
#	assigned a block of multicast address space for use in Web
#	Caching.  Plese write to us at nlanr-cache@nlanr.net to receive
#	an address for your own use.
#
#	If you are unsure about multicast, please read the Multicast
#	chapter in the Squid FAQ (http://squid.nlanr.net/Squid/FAQ/).
#
#	Usage: mcast_groups 239.128.16.128 224.0.1.20
#
#	By default, Squid doesn't listen on any multicast groups.
#
#mcast_groups 239.128.16.128

#  TAG: tcp_incoming_address
#  TAG: tcp_outgoing_address
#  TAG: udp_incoming_address
#  TAG: udp_outgoing_address
#	Usage: tcp_incoming_address 10.20.30.40
#	       udp_outgoing_address fully.qualified.domain.name
#
#	tcp_incoming_address	is used for the HTTP socket which accepts
#				connections from clients and other caches.
#	tcp_outgoing_address	is used for connections made to remote
#				servers and other caches.
#	udp_incoming_address	is used for the ICP socket receiving packets
#				from other caches.
#	udp_outgoing_address	is used for ICP packets sent out to other
#				caches.
#
#	The default behaviour is to not bind to any specific address.
#
#	NOTE, udp_incoming_address and udp_outgoing_address can not
#	have the same value (unless it is 0.0.0.0) since they both use
#	port 3130.
#
#tcp_incoming_address 0.0.0.0
#tcp_outgoing_address 0.0.0.0
#udp_incoming_address 0.0.0.0
#udp_outgoing_address 0.0.0.0


# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM
# -----------------------------------------------------------------------------

#  TAG: cache_peer
#	To specify other caches in a hierarchy, use the format:
#
#		hostname type http_port icp_port
#
#	For example,
#
#	#                                        proxy  icp
#	#          hostname             type     port   port  options
#	#          -------------------- -------- ----- -----  -----------
#cache_peer proxy.test.deere.com       parent    80
#	cache_peer sib1.foo.net         sibling   3128  3130  [proxy-only]
#	cache_peer sib2.foo.net         sibling   3128  3130  [proxy-only]
#
#	      type:  either 'parent', 'sibling', or 'multicast'.
#
#	proxy_port:  The port number where the cache listens for proxy
#		     requests.
#
#	  icp_port:  Used for querying neighbor caches about
#		     objects.  To have a non-ICP neighbor
#		     specify '7' for the ICP port and make sure the
#		     neighbor machine has the UDP echo port
#		     enabled in its /etc/inetd.conf file.
#
#	    options: proxy-only
#		     weight=n
#		     ttl=n
#		     no-query
#		     default
#		     round-robin
#		     multicast-responder
#		     closest-only
#		     no-digest
#		     no-netdb-exchange
#		     no-delay
#
#		     use 'proxy-only' to specify that objects fetched
#		     from this cache should not be saved locally.
#
#		     use 'weight=n' to specify a weighted parent.
#		     The weight must be an integer.  The default weight
#		     is 1, larger weights are favored more.
#
#		     use 'ttl=n' to specify a IP multicast TTL to use
#		     when sending an ICP request to this address.
#		     Only useful when sending to a multicast group.
#		     Because we don't accept ICP replies from random
#		     hosts, you must configure other group members as
#		     peers with the 'multicast-responder' option below.
#
#		     use 'no-query' to NOT send ICP queries to this
#		     neighbor.
#
#		     use 'default' if this is a parent cache which can
#		     be used as a "last-resort." You should probably
#		     only use 'default' in situations where you cannot
#		     use ICP with your parent cache(s).
#
#		     use 'round-robin' to define a set of parents which
#		     should be used in a round-robin fashion in the
#		     absence of any ICP queries.
#
#		     'multicast-responder' indicates that the named peer
#		     is a member of a multicast group.  ICP queries will
#		     not be sent directly to the peer, but ICP replies
#		     will be accepted from it.
#
#		     'closest-only' indicates that, for ICP_OP_MISS
#		     replies, we'll only forward CLOSEST_PARENT_MISSes
#		     and never FIRST_PARENT_MISSes.
#
#		     use 'no-digest' to NOT request cache digests from
#		     this neighbor.
#
#		     'no-netdb-exchange' disables requesting ICMP
#		     RTT database (NetDB) from the neighbor.
#
#		     use 'no-delay' to prevent access to this neighbor
#		     from influencing the delay pools.
#
#	NOTE: non-ICP neighbors must be specified as 'parent'.
#
#cache_peer	204.54.68.130 parent 8000 3130
cache_host proxy.test.deere.com parent 8000 3130 no-query default

#  TAG: cache_peer_domain
#	Use to limit the domains for which a neighbor cache will be
#	queried.  Usage:
#
#	cache_peer_domain cache-host domain [domain ...]
#	cache_peer_domain cache-host !domain
#
#	For example, specifying
#
#		cache_peer_domain parent.foo.net	.edu
#
#	has the effect such that UDP query packets are sent to
#	'bigserver' only when the requested object exists on a
#	server in the .edu domain.  Prefixing the domainname
#	with '!' means that the cache will be queried for objects
#	NOT in that domain.
#
#	NOTE:	* Any number of domains may be given for a cache-host,
#		  either on the same or separate lines.
#		* When multiple domains are given for a particular
#		  cache-host, the first matched domain is applied.
#		* Cache hosts with no domain restrictions are queried
#		  for all requests.
#		* There are no defaults.
#		* There is also a 'cache_peer_access' tag in the ACL
#		  section.

#  TAG: neighbor_type_domain
#	usage: neighbor_type_domain parent|sibling domain domain ...
#
#	Modifying the neighbor type for specific domains is now
#	possible.  You can treat some domains differently than the the
#	default neighbor type specified on the 'cache_peer' line.
#	Normally it should only be necessary to list domains which
#	should be treated differently because the default neighbor type
#	applies for hostnames which do not match domains listed here.
#
#EXAMPLE:
#	cache_peer  parent cache.foo.org 3128 3130
#	neighbor_type_domain cache.foo.org sibling .com .net
#	neighbor_type_domain cache.foo.org sibling .au .de

#  TAG: icp_query_timeout	(msec)
#	Normally Squid will automatically determine an optimal ICP
#	query timeout value based on the round-trip-time of recent ICP
#	queries.  If you want to override the value determined by
#	Squid, set this 'icp_query_timeout' to a non-zero value.  This
#	value is specified in MILLISECONDS, so, to use a 2-second
#	timeout (the old default), you would write:
#
#		icp_query_timeout 2000
#
#icp_query_timeout 0

#  TAG: mcast_icp_query_timeout	(msec)
#	For Multicast peers, Squid regularly sends out ICP "probes" to
#	count how many other peers are listening on the given multicast
#	address.  This value specifies how long Squid should wait to
#	count all the replies.  The default is 2000 msec, or 2
#	seconds.
#
#mcast_icp_query_timeout 2000

#  TAG: dead_peer_timeout	(seconds)
#	This controls how long Squid waits to declare a peer cache
#	as "dead."  If there are no ICP replies received in this
#	amount of time, Squid will declare the peer dead and not
#	expect to receive any further ICP replies.  However, it
#	continues to send ICP queries, and will mark the peer as
#	alive upon receipt of the first subsequent ICP reply.
#
#dead_peer_timeout 10 seconds

#  TAG: hierarchy_stoplist
#	A list of words which, if found in a URL, cause the object to
#	be handled directly by this cache.  In other words, use this
#	to not query neighbor caches for certain objects.  You may
#	list this option multiple times.
#
#	The default is to directly fetch URLs containing 'cgi-bin' or '?'.
#
#hierarchy_stoplist cgi-bin ?

#  TAG: no_cache
#	A list of ACL elements which, if matched, cause the reply to
#	immediately removed from the cache.  In other words, use this
#	to force certain objects to never be cached.
#
#	You must use the word 'DENY' to indicate the ACL names which should
#	NOT be cached.
#
#	There is no default.  We recommend you uncomment the following
#	two lines.
#
#acl QUERY urlpath_regex cgi-bin \?
#no_cache deny QUERY


# OPTIONS WHICH AFFECT THE CACHE SIZE
# -----------------------------------------------------------------------------

#  TAG: cache_mem	(bytes)
#	NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS
#	SIZE.  IT PLACES A LIMIT ON ONE ASPECT OF SQUID'S MEMORY
#	USAGE.  SQUID USES MEMORY FOR OTHER THINGS AS WELL.
#	YOUR PROCESS WILL PROBABLY BECOME TWICE OR THREE TIMES
#	BIGGER THAN THE VALUE YOU PUT HERE 
#
#	'cache_mem' specifies the ideal amount of memory to be used
#	for:
#		* In-Transit objects
#		* Hot Objects
#		* Negative-Cached objects
#
#	Data for these objects are stored in 4 KB blocks.  This
#	parameter specifies the ideal upper limit on the total size of
#	4 KB blocks allocated.  In-Transit objects take the highest
#	priority.
#
#	In-transit objects have priority over the others.  When
#	additional space is needed for incoming data, negative-cached
#	and hot objects will be released.  In other words, the
#	negative-cached and hot objects will fill up any unused space
#	not needed for in-transit objects.
#
#	If circumstances require, this limit will be exceeded.
#	Specifically, if your incoming request rate requires more than
#	'cache_mem' of memory to hold in-transit objects, Squid will
#	exceed this limit to satisfy the new requests.  When the load
#	decreases, blocks will be freed until the high-water mark is
#	reached.  Thereafter, blocks will be used to store hot
#	objects.
#
#	The values of cache_mem_low and cache_mem_high (below) can be
#	used to tune the use of the memory pool.  When the high mark is
#	reached, in-transit and hot objects will be released to clear
#	space.  When an object transfer is completed, it will remain in
#	memory only if the current memory usage is below the low water
#	mark.
#
#	The default is 8 Megabytes.
#
cache_mem  4 MB

#  TAG: cache_swap_low	(percent, 0-100)
#  TAG: cache_swap_high	(percent, 0-100)
#	The low- and high-water marks for cache LRU replacement.  LRU
#	replacement begins when the high-water mark is reached and ends
#	when enough objects have been removed and the low-water mark is
#	reached. Defaults are 90% and 95%. If you have a large cache, 5%
#	could be hundreds of MB. If this is the case you may wish to
#	set these numbers closer together.
#
#cache_swap_low  90
#cache_swap_high 95

#  TAG: cache_mem_low	(in percent, 0-100)
#  TAG: cache_mem_high	(in percent, 0-100)
#	The low- and high-water mark for cache memory storage.  When
#	the amount of RAM used by the hot-object RAM cache reaches this
#	point, the cache starts throwing objects out of the RAM cache
#	(but they remain on disk).  Defaults are 75% and 90%.
#
#cache_mem_low  75
#cache_mem_high 90

#  TAG: maximum_object_size	(bytes)
#	Objects larger than this size will NOT be saved on disk.  The
#	value is specified in kilobytes, and the default is 4MB.  If
#	you wish to get a high BYTES hit ratio, you should probably
#	increase this (one 32 MB object hit counts for 3200 10KB
#	hits).  If you wish to increase speed more than your want to
#	save bandwidth you should leave this low.
#
maximum_object_size 4096 KB

#  TAG: ipcache_size	(number of entries)
#  TAG: ipcache_low	(percent)
#  TAG: ipcache_high	(percent)
#	The size, low-, and high-water marks for the IP cache.
#
#ipcache_size 1024
#ipcache_low  90
#ipcache_high 95

#  TAG: fqdncache_size	(number of entries)
#	Maximum number of FQDN cache entries.
#fqdncache_size 1024


# LOGFILE PATHNAMES AND CACHE DIRECTORIES
# -----------------------------------------------------------------------------

#  TAG: cache_dir
#	Usage:
#	
#	cache_dir Directory-Name Mbytes Level-1 Level2
#
#	You can specify multiple cache_dir lines to spread the
#	cache among different disk partitions.
#
#	'Directory' is a top-level directory where cache swap
#	files will be stored.  If you want to use an entire disk
#	for caching, then this can be the mount-point directory.
#	The directory must exist and be writable by the Squid
#	process.  Squid will NOT create this directory for you.
#
#	If no 'cache_dir' lines are specified, the following
#	default will be used: /usr/local/squid/cache.
#
#	'Mbytes' is the amount of disk space (MB) to use under this
#	directory.  The default is 100 MB.  Change this to suit your
#	configuration.
#
#	'Level-1' is the number of first-level subdirectories which
#	will be created under the 'Directory'.  The default is 16.
#
#	'Level-2' is the number of second-level subdirectories which
#	will be created under each first-level directory.  The default
#	is 256.
#
cache_dir /var/cache/squid 4000 16 256

#  TAG: cache_access_log
#	Logs the client request activity.  Contains an entry for
#	every HTTP and ICP request received.
#
cache_access_log /var/logs/squid/access.log

#  TAG: cache_log
#	Cache logging file. This is where general information about
#	your cache's behaviour goes. You can increase the amount of data
#	logged to this file with the "debug_options" tag below.
#
#cache_log /usr/local/squid/logs/cache.log

#  TAG: cache_store_log
#	Logs the activities of the storage manager.  Shows which
#	objects are ejected from the cache, and which objects are
#	saved and for how long.  To disable, enter "none". There are
#	not really utilities to analyse this data, so you can safely
#	disable it.
#
cache_store_log /var/logs/squid/store.log

#  TAG: cache_swap_log
#	Location for the cache "swap.log."  This log file holds the
#	metadata of objects saved on disk.  It is used to rebuild the
#	cache during startup.  Normally this file resides in the first
#	'cache_dir' directory, but you may specify an alternate
#	pathname here.  Note you must give a full filename, not just
#	a directory. Since this is the index for the whole object
#	list you CANNOT periodically rotate it!
#
#cache_swap_log

#  TAG: emulate_httpd_log	on|off
#	The Cache can emulate the log file format which many 'httpd'
#	programs use.  To disable/enable this emulation, set
#	emulate_httpd_log to 'off' or 'on'.  The default
#	is to use the native log format since it includes useful
#	information that Squid-specific log analysers use.
#
#emulate_httpd_log off

#  TAG: mime_table
#	Pathname to Squid's MIME table. You shouldn't need to change
#	this, but the default file contains examples and formatting
#	information if you do.
#
#mime_table /usr/local/squid/etc/mime.conf

#  TAG: log_mime_hdrs	on|off
#	The Cache can record both the request and the response MIME
#	headers for each HTTP transaction.  The headers are encoded
#	safely and will appear as two bracketed fields at the end of
#	the access log (for either the native or httpd-emulated log
#	formats).  To enable this logging set log_mime_hdrs to 'on'.
#
#log_mime_hdrs off

#  TAG: useragent_log
#	If configured with the "--enable-useragent_log" configure
#	option, Squid will write the User-Agent field from HTTP
#	requests to the filename specified here.  By default
#	useragent_log is disabled.
#
#useragent_log none

#  TAG: pid_filename
#	A filename to write the process-id to.  To disable, enter "none".
#
#pid_filename /usr/local/squid/logs/squid.pid

#  TAG: debug_options
#	Logging options are set as section,level where each source file
#	is assigned a unique section.  Lower levels result in less
#	output,  Full debugging (level 9) can result in a very large
#	log file, so be careful.  The magic word "ALL" sets debugging
#	levels for all sections.  We recommend normally running with
#	"ALL,1".
#
debug_options ALL,1 28,9

#  TAG: ident_lookup	on|off
#	If you wish to make an RFC931/ident lookup of the client
#	username for each connection, enable this.  It is off by
#	default.
#
ident_lookup off

#  TAG: log_fqdn	on|off
#	Turn this on if you wish to log fully qualified domain names
#	in the access.log. To do this Squid does a DNS lookup of all
#	IP's connecting to it. This can (in some situations) increase
#	latency, which makes your cache seem slower for interactive
#	browsing. 
#
log_fqdn off

#  TAG: client_netmask
#	A netmask for client addresses in logfiles and cachemgr output.
#	Change this to protect the privacy of your cache clients.
#	A netmask of 255.255.255.0 will log all IP's in that range with
#	the last digit set to '0'.
#
#client_netmask 255.255.255.255


# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
# -----------------------------------------------------------------------------

#  TAG: ftp_user
#	If you want the anonymous login password to be more informative
#	(and enable the use of picky ftp servers), set this to something
#	resonable for your domain, like wwwuser@somewhere.net
#
#	The reason why this is domainless by default is that the
#	request can be made on the behalf of a user in any domain,
#	depending on how the cache is used.
#	Some ftp server also validate that the email address is valid
#	(for example perl.com).
#
#ftp_user Squid@

#  TAG: ftp_list_width
#	Sets the width of ftp listings. This should be set to fit in
#	the width of a standard browser. Setting this too small
#	can cut off long filenames when browsing ftp sites.
#
#ftp_list_width 32

#  TAG: cache_dns_program
#	Specify the location of the executable for dnslookup process.
#
#cache_dns_program /usr/local/squid/bin/dnsserver

#  TAG: dns_children
#	The number of processes spawn to service DNS name lookups.
#	For heavily loaded caches on large servers, you should
#	probably increase this value to at least 10.  The maximum
#	is 32.  The default is 5.
#
#	To disable dnsservers, set this to 0.  NOTE, this is very
#	strongly discouraged.  If you disable dnsservers your Squid
#	process will BLOCK on DNS lookups!
#
#dns_children 5

#  TAG: dns_defnames	on|off
#	Normally the 'dnsserver' disables the RES_DEFNAMES resolver
#	option (see res_init(3)).  This prevents caches in a hierarchy
#	from interpreting single-component hostnames locally.  To allow
#	dnsserver to handle single-component names, enable this
#	option.
#
#dns_defnames on

#  TAG: dns_nameservers
#	Use this if you want to specify a list of DNS name servers
#	(IP addresses) to use instead of those given in your
#	/etc/resolv.conf file.
#
#	Example: dns_nameservers 10.0.0.1 192.172.0.4
#
#dns_nameservers none

#  TAG: unlinkd_program
#	Specify the location of the executable for file deletion process.
#	This isn't needed if you are using async-io since it's handled by
#	a thread.
#
#unlinkd_program /usr/local/squid/bin/unlinkd

#  TAG: pinger_program
#	Specify the location of the executable for the pinger process.
#	This is only useful if you configured Squid (during compliation)
#	with the '--enable-icmp' option.
#
#pinger_program /usr/local/squid/bin/pinger

#  TAG: redirect_program
#	Specify the location of the executable for the URL redirector.
#	Since they can perform almost any function there isn't one included.
#	See the Release-Notes for information on how to write one.
#	By default, a redirector is not used.
#
#redirect_program none

#  TAG: redirect_children
#	The number of redirector processes to spawn. If you start
#	too few Squid will have to wait for them to process a backlog of
#	URLs, slowing it down. If you start too many they will use RAM
#	and other system resources.
#
#redirect_children 5

#  TAG: authenticate_program
#	Specify the command for the external authenticator.  Such a
#	program reads a line containing "username password" and replies
#	"OK" or "ERR" in an endless loop.  If you use an authenticator,
#	make sure you have 1 acl of type proxy_auth.  By default, the
#	authenticator_program is not used.
#
#	If you want to use the traditional proxy authentication,
#	jump over to the ../auth_modules/NCSA directory and
#	type:
#		% make
#		% make install
#
#	Then, set this line to something like
#
#	authenticate_program /usr/local/squid/bin/ncsa_auth /usr/local/squid/etc/passwd
#
#authenticate_program none

#  TAG: authenticate_children
#	The number of authenticator processes to spawn (default 5). If you
#	start too few Squid will have to wait for them to process a backlog
#	of usercode/password verifications, slowing it down. When password
#	verifications are done via a (slow) network you are likely to need
#	lots of authenticator processes.
#
#authenticate_children 5


# OPTIONS FOR TUNING THE CACHE
# -----------------------------------------------------------------------------

#  TAG: wais_relay_host
#  TAG: wais_relay_port
#	Relay WAIS request to host (1st arg) at port (2 arg).
#
#wais_relay_host localhost
#wais_relay_port 8000

#  TAG: request_size	(KB)
#	Maximum allowed request size in kilobytes.  If people are using
#	POST to upload files, then set this to the largest acceptable
#	filesize plus a few extra kbytes.
#
#request_size 100 KB

#  TAG: refresh_pattern
#	usage: refresh_pattern [-i] regex min percent max [options]
#
#	By default, regular expressions are CASE-SENSITIVE.  To make
#	them case-insensitive, use the -i option.
#
#	min and max are specified in MINUTES.
#	percent is an integer number.
#
#	options: override-expire
#		 override-lastmod
#		 reload-into-ims
#		 ignore-reload
#
#		override-expire enforces min age even if the server
#		sent a Expires: header. Doing this VIOLATES the HTTP
#		standard.  Enabling this feature could make you liable
#		for problems which it causes.
#
#		override-lastmod enforces min age even on objects
#		that was modified recently.
#
#		reload-into-ims changes client no-cache or ``reload''
#		to If-Modified-Since requests. Doing this VIOLATES the
#		HTTP standard. Enabling this feature could make you
#		liable for problems which it causes.
#
#		ignore-reload ignores a client no-cache or ``reload''
#		header. Doing this VIOLATES the HTTP standard. Enabling
#		this feature could make you liable for problems which
#		it causes.
#		
#	Please see the file doc/Release-Notes-1.1.txt for a full
#	description of Squid's refresh algorithm.  Basically a
#	cached object is: (the order is changed from 1.1.X)
#
#		STALE if age > max
#		FRESH if expires < now, else STALE
#		FRESH if lm-factor < percent, else STALE
#		FRESH if age < min
#		else STALE
#
#	The refresh_pattern lines are checked in the order listed here.
#	The first entry which matches is used.  If none of the entries
#	match, then the default will be used.
#
#Default:
#refresh_pattern 	.	0 20% 4320

#  TAG: reference_age
#	As a part of normal operation, Squid performs Least Recently
#	Used removal of cached objects.  The LRU age for removal is
#	computed dynamically, based on the amount of disk space in
#	use.  The dynamic value can be seen in the Cache Manager 'info'
#	output.
#
#	The 'reference_age' parameter defines the maximum LRU age.  For
#	example, setting reference_age to '1 week' will cause objects
#	to be removed if they have not been accessed for a week or
#	more.  The default value is one month.
#
#	Specify a number here, followed by units of time.  For example:
#		1 week
#		3.5 days
#		4 months
#		2.2 hours
#
#reference_age 1 month

#  TAG: quick_abort_min	(KB)
#  TAG: quick_abort_max	(KB)
#  TAG: quick_abort_pct	(percent)
#	The cache can be configured to continue downloading aborted
#	requests.  This may be undesirable on slow (e.g. SLIP) links
#	and/or very busy caches.  Impatient users may tie up file
#	descriptors and bandwidth by repeatedly requesting and
#	immediately aborting downloads.
#
#	When the user aborts a request, Squid will check the
#	quick_abort values to the amount of data transfered until
#	then.
#
#	If the transfer has less than 'quick_abort_min' KB remaining,
#	it will finish the retrieval.  Setting 'quick_abort_min' to -1
#	will disable the quick_abort feature.
#
#	If the transfer has more than 'quick_abort_max' KB remaining,
#	it will abort the retrieval.
#
#	If more than 'quick_abort_pct' of the transfer has completed,
#	it will finish the retrieval.
#
#quick_abort_min -1 KB
#quick_abort_max 0 KB
#quick_abort_pct 0

#  TAG: negative_ttl	time-units
#	Time-to-Live (TTL) for failed requests.  Certain types of
#	failures (such as "connection refused" and "404 Not Found") are
#	negatively-cached for a configurable amount of time.  The
#	default is 5 minutes.  Note that this is different from
#	negative caching of DNS lookups.
#
negative_ttl 5 minutes

#  TAG: positive_dns_ttl	time-units
#	Time-to-Live (TTL) for positive caching of successful DNS lookups.
#	Default is 6 hours (360 minutes).  If you want to minimize the
#	use of Squid's ipcache, set this to 1, not 0.
#
positive_dns_ttl 6 hours

#  TAG: negative_dns_ttl	time-units
#	Time-to-Live (TTL) for negative caching of failed DNS lookups.
#
negative_dns_ttl 5 minutes


# TIMEOUTS
# -----------------------------------------------------------------------------

#  TAG: connect_timeout	time-units
#	Some systems (notably Linux) can not be relied upon to properly
#	time out connect(2) requests.  Therefore the Squid process
#	enforces its own timeout on server connections.  This parameter
#	specifies how long to wait for the connect to complete.  The
#	default is two minutes (120 seconds).
#
#connect_timeout 120 seconds

#  TAG: siteselect_timeout	time-units
#	For URN to multiple URL's URL selection
#
#siteselect_timeout 4 seconds

#  TAG: read_timeout	time-units
#	The read_timeout is applied on server-side connections.  After
#	each successful read(), the timeout will be extended by this
#	amount.  If no data is read again after this amount of time,
#	the request is aborted and logged with ERR_READ_TIMEOUT.  The
#	default is 15 minutes.
#
read_timeout 15 minutes

#  TAG: request_timeout
#	How long to wait for an HTTP request after connection
#	establishment.  For persistent connections, wait this long
#	after the previous request completes.
#
request_timeout 30 seconds

#  TAG: client_lifetime	time-units
#	The maximum amount of time that a client (browser) is allowed to
#	remain connected to the cache process.  This protects the Cache
#	from having alot of sockets (and hence file descriptors) tied up
#	in a CLOSE_WAIT state from remote clients that go away without
#	properly shutting down (either because of a network failure or
#	because of a poor client implementation).  The default is one
#	day, 1440 minutes.
#
#	NOTE:  The default value is intended to be much larger than any
#	client would ever need to be connected to your cache.  You
#	should probably change client_lifetime only as a last resort.
#	If you seem to have many client connections tying up
#	filedescriptors, we recommend first tuning the read_timeout,
#	request_timeout, pconn_timeout and quick_abort values.
#
#client_lifetime 1 day

#  TAG: half_closed_clients
#	Some clients may shutdown the sending side of their TCP
#	connections, while leaving their receiving sides open.	Sometimes,
#	Squid can not tell the difference between a half-closed and a
#	fully-closed TCP connection.  By default, half-closed client
#	connections are kept open until a read(2) or write(2) on the
#	socket returns an error.  Change this option to 'off' and Squid
#	will immediately close client connections when read(2) returns
#	"no more data to read."
#
half_closed_clients on

#  TAG: pconn_timeout
#	Timeout for idle persistent connections to servers and other
#	proxies.
pconn_timeout 120 seconds

#  TAG: shutdown_lifetime	time-units
#	When SIGTERM or SIGHUP is received, the cache is put into
#	"shutdown pending" mode until all active sockets are closed.
#	This value is the lifetime to set for all open descriptors
#	during shutdown mode.  Any active clients after this many
#	seconds will receive a 'timeout' message.
#
#shutdown_lifetime 30 seconds


# ACCESS CONTROLS
# -----------------------------------------------------------------------------

#  TAG: acl
#	Defining an Access List
#
#	acl aclname acltype string1 ...
#	acl aclname acltype "file" ...
#
#	when using "file", the file should contain one item per line
#
#	acltype is one of src dst srcdomain dstdomain url_pattern
#		urlpath_pattern time port proto method browser user
#
#	acl aclname src      ip-address/netmask ... (clients IP address)
#	acl aclname src      addr1-addr2/netmask ... (range of addresses)
#	acl aclname dst      ip-address/netmask ... (URL host's IP address)
#
#	acl aclname srcdomain   foo.com ...     # reverse lookup, client IP
#	acl aclname dstdomain   foo.com ...     # Destination server from URL
#	acl aclname srcdom_regex xxx ...        # regex matching client name
#	acl aclname dstdom_regex xxx ...        # regex matching server
#	  # For dstdomain and dstdom_regex  a reverse lookup is tried if a IP
#	  # based URL is used. The name "none" is used if the reverse lookup
#	  # fails.
#
#	acl aclname time     [day-abbrevs]  [h1:m1-h2:m2]
#	    day-abbrevs:
#		S - Sunday
#		M - Monday
#		T - Tuesday
#		W - Wednesday
#		H - Thursday
#		F - Friday
#		A - Saturday
#	    h1:m1 must be less than h2:m2
#	acl aclname url_regex  ^http:// ...	# regex matching on whole URL
#	acl aclname urlpath_regex  \.gif$ ...	# regex matching on URL path
#	acl aclname port     80 70 21 ...
#	acl aclname port     0-1024 ...		# ranges allowed
#	acl aclname proto    HTTP FTP ...
#	acl aclname method   GET POST ...
#	acl aclname browser  regexp
#	acl aclname user     username ...	# string match on ident output.
#						# use REQUIRED to accept any
#						# non-null ident.
#	acl aclname src_as   number ... 
#	acl aclname dst_as   number ...
#	  # Except for access control, AS numbers can be used for
#	  # routing of requests to specific caches. Here's an 
#	  # example for routing all requests for AS#1241 and only 
#	  # those to mycache.mydomain.net:
#	  # acl asexample dst_as 1241
#	  # cache_peer_access mycache.mydomain.net allow asexample
#	  # cache_peer_access mycache_mydomain.net deny all
#
#	acl aclname proxy_auth [ refresh ]
#	  # Use an EXTERNAL authentication program to check username/password
#	  # combinations (see authenticate_program).
#	  #
#	  # 'timeout' is the time a checked username/password combination
#	  # remains cached (default = 3600 secs). If a wrong password
#	  # is given for a cached user, the user gets removed from the
#	  # username/password cache forcing a revalidation.
#	  #
#	  # When using a proxy_auth ACL in an http_access rule, make sure
#	  # it is the *last* in the list and the only proxy_auth ACL in
#	  # the list.
#	  #
#	  # NOTE: when a Proxy-Authentication header is sent but it is not
#	  # needed during ACL checking the username is NOT logged
#	  # in access.log.
#
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl all src 0.0.0.0/0.0.0.0
#acl myexample dst_as 1241
acl SSL_ports port 443 563
#acl Safe_ports port 80 21 70 1025-65535
acl CONNECT method CONNECT
#acl password proxy_auth 300

#  TAG: http_access
#	Allowing or Denying access based on defined access lists
#
#	Access to the HTTP port:
#	http_access allow|deny [!]aclname ...
#
#	Access to the ICP port:
#	icp_access  allow|deny [!]aclname ...
#
#	NOTE on default values:
#
#	If there are no "access" lines present, the default is to allow
#	the request.
#
#	If none of the "access" lines cause a match, the default is the
#	opposite of the last line in the list.  If the last line was
#	deny, then the default is allow.  Conversely, if the last line
#	is allow, the default will be deny.  For these reasons, it is a
#	good idea to have an "deny all" or "allow all" entry at the end
#	of your access lists to avoid potential confusion.
#
#
#	Only allow access to the cache manager functions from the local host.
#http_access deny manager !localhost
#http_access deny CONNECT !SSL_ports
#http_access deny !Safe_ports
#
#	Allow everything else
http_access allow  all

#  TAG: icp_access
#	Reply to all ICP queries we receive
#
icp_access  allow  all

#  TAG: miss_access
#	Use to force your neighbors to use you as a sibling instead of
#	a parent.  For example:
#
#		acl localclients src 172.16.0.0/16
#		miss_access allow localclients
#		miss_access deny  !localclients
#
#	This means that only your local clients are allowed to fetch
#	MISSES and all other clients can only fetch HITS.
#
#	By default, allow all clients who passed the http_access rules
#	to fetch MISSES from us.
#
miss_access allow  all

#  TAG: cache_peer_access
#	Similar to 'cache_peer_domain' but provides more flexibility by
#	using ACL elements.
#
#	cache_peer_access cache-host allow|deny [!]aclname ...
#
#	The syntax is identical to 'http_access' and the other lists of
#	ACL elements.  See the comments for 'http_access' below, or
#	the Squid FAQ (http://squid.nlanr.net/Squid/FAQ/FAQ-10.html).

#  TAG: proxy_auth_realm
#	Specifies the realm name which is to be reported to the client for
#	proxy authentication (part of the text the user will see when
#	prompted their username and password).
#
#proxy_auth_realm Squid proxy-caching web server


# ADMINISTRATIVE PARAMETERS
# -----------------------------------------------------------------------------

#  TAG: cache_mgr
#	Email-address of local cache manager who will receive
#	mail if the cache dies.  The default is "webmaster."
#
cache_mgr squid

#  TAG: cache_effective_user
#  TAG: cache_effective_group
#
#	If the cache is run as root, it will change its effective/real
#	UID/GID to the UID/GID specified below.  The default is to
#	change to UID to nobody and GID to nogroup.
#
#	If Squid is not started as root, the default is to keep the
#	current UID/GID.  Note that if Squid is not started as root then
#	you cannot set http_port to a value lower than 1024.
#
cache_effective_user squid
cache_effective_group squid

#  TAG: visible_hostname
#	If you want to present a special hostname in error messages, etc,
#	then define this.  Otherwise, the return value of gethostname()
#	will be used. If you have multiple caches in a cluster and
#	get errors about IP-forwarding you must set them to have individual
#	names with this setting.
#
#visible_hostname www-cache.foo.org

#  TAG: unique_hostname
#	If you want to have multiple machines with the same
#	'visible_hostname' then you must give each machine a different
#	'unique_hostname' so that forwarding loops can be detected.
#
#unique_hostname www-cache1.foo.org


# OPTIONS FOR THE CACHE REGISTRATION SERVICE
# -----------------------------------------------------------------------------
#
#	This section contains parameters for the (optional) cache
#	announcement service.  This service is provided to help
#	cache administrators locate one another in order to join or
#	create cache hierarchies.
#
#	An 'announcement' message is sent (via UDP) to the registration
#	service by Squid.  By default, the annoucement message is NOT
#	SENT unless you enable it with 'announce_period' below.
#
#	The announcement message includes your hostname, plus the
#	following information from this configuration file:
#
#		http_port
#		icp_port
#		cache_mgr
#
#	All current information is processed regularly and made
#	available on the Web at http://ircache.nlanr.net/Cache/Tracker/.

#  TAG: announce_period
#	This is how frequently to send cache announcements.  The
#	default is `0' which disables sending the announcement
#	messages.
#
#	To enable announcing your cache, just uncomment the line
#	below.
#
#announce_period 1 day

#  TAG: announce_host
#  TAG: announce_file
#  TAG: announce_port
#	announce_host and announce_port set the hostname and port
#	number where the registration message will be sent.
#
#	Hostname will default to 'tracker.ircache.net' and port will
#	default default to 3131.  If the 'filename' argument is given,
#	the contents of that file will be included in the announce
#	message.
#
#announce_host tracker.ircache.net
#announce_port 3131


# HTTPD-ACCELERATOR OPTIONS
# -----------------------------------------------------------------------------

#  TAG: httpd_accel_host
#  TAG: httpd_accel_port
#	If you want to run Squid as an httpd accelerator, define the
#	host name and port number where the real HTTP server is.
#
#	If you want virtual host support then specify the hostname
#	as "virtual".
#
#	NOTE: enabling httpd_accel_host disables proxy-caching and
#	ICP.  If you want these features enabled also, then set
#	the 'httpd_accel_with_proxy' option.
#
#httpd_accel_host hostname
#httpd_accel_port port

#  TAG: httpd_accel_with_proxy	on|off
#	If you want to use Squid as both a local httpd accelerator
#	and as a proxy, change this to 'on'.
#
#httpd_accel_with_proxy off

#  TAG: httpd_accel_uses_host_header	on|off
#	HTTP/1.1 requests include a Host: header which is basically the
#	hostname from the URL.  Squid can be an accelerator for
#	different HTTP servers by looking at this header.  However,
#	Squid does NOT check the value of the Host header, so it opens
#	a big security hole.  We recommend that this option remain
#	disabled unless you are sure of what you are doing.
#
#	However, you will need to enable this option if you run Squid
#	as a transparent proxy.  Otherwise, virtual servers which
#	require the Host: header will not be properly cached.
#httpd_accel_uses_host_header off


# MISCELLANEOUS
# -----------------------------------------------------------------------------

#  TAG: dns_testnames
#	The DNS tests exit as soon as the first site is successfully looked up
#
#	If you want to disable DNS tests, do not comment out or delete this
#	list.  Instead use the -D command line option
#
#dns_testnames netscape.com internic.net nlanr.net microsoft.com

#  TAG: logfile_rotate
#	Specifies the number of logfile rotations to make when you
#	type 'squid -k rotate'.  The default is 10, which will rotate
#	with extensions 0 through 9.  Setting logfile_rotate to 0 will
#	disable the rotation, but the logfiles are still closed and
#	re-opened.  This will enable you to rename the logfiles
#	yourself just before sending the rotate signal.
#
#	Note, the 'squid -k rotate' command normally sends a USR1
#	signal to the running squid process.  In certain situations
#	(e.g. on Linux with Async I/O), USR1 is used for other
#	purposes, so -k rotate uses another signal.  It is best to get
#	in the habit of using 'squid -k rotate' instead of 'kill -USR1
#	<pid>'.
#
#logfile_rotate 10

#  TAG: append_domain
#	Appends local domain name to hostnames without any dots in
#	them.  append_domain must begin with a period.
#
#append_domain .yourdomain.com

#  TAG: tcp_recv_bufsize	(bytes)
#	Size of receive buffer to set for TCP sockets.  Probably just
#	as easy to change your kernel's default.  Set to zero to use
#	the default buffer size.
#
#tcp_recv_bufsize 0 bytes

#  TAG: err_html_text
#	HTML text to include in error messages.  Make this a "mailto"
#	URL to your admin address, or maybe just a link to your
#	organizations Web page.
#
#	To include this in your error messages, you must rewrite
#	the error template files (found in the "errors" directory).
#	Wherever you want the 'err_html_text' line to appear,
#	insert a %L tag in the error template file.
#err_html_text

#  TAG: deny_info
#	Usage:   deny_info err_page_name acl
#	Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys
#
#	This can be used to return a ERR_ page for requests which
#	do not pass the 'http_access' rules.  A single ACL will cause
#	the http_access check to fail.  If a 'deny_info' line exists
#	for that ACL then Squid returns a corresponding error page.
#
#	You may use ERR_ pages that come with Squid or create your own pages
#	and put them into the configured errors/ directory.

#  TAG: memory_pools	on|off
#	If set, Squid will keep pools of allocated (but unused) memory
#	available for future use.  If memory is a premium on your
#	system and you believe your malloc library outperforms Squid 
#	routines, disable this.
#
#memory_pools on

#  TAG: memory_pools_limit	(bytes)
#	Used only with memory_pools on:
#	memory_pools_limit 50 MB
#
#	If set to a non-zero value, Squid will keep at most the specified
#	limit of allocated (but unused) memory in memory pools. All free()
#	requests that exceed this limit will be handled by your malloc
#	library. Squid does not pre-allocate any memory, just safe-keeps
#	objects that otherwise would be free()d. Thus, it is safe to set
#	memory_pools_limit to a reasonably high value even if your
#	configuration will use less memory.
#
#	If not set (default) or set to zero, Squid will keep all memory it
#	can. That is, there will be no limit on the total amount of memory
#	used for safe-keeping.
#
#	To disable memory allocation optimization, do not set
#	memory_pools_limit to 0. Set memory_pools to "off" instead.
#
#	An overhead for maintaining memory pools is not taken into account
#	when the limit is checked. This overhead is close to four bytes per
#	object kept. However, pools may actually _save_ memory because of
#	reduced memory thrashing in your malloc library.

#  TAG: forwarded_for	on|off
#	If set, Squid will include your system's IP address or name
#	in the HTTP requests it forwards.  By default it looks like
#	this:
#
#		X-Forwarded-For: 192.1.2.3
#
#	If you disable this, it will appear as
#
#		X-Forwarded-For: unknown
#
#forwarded_for on

#  TAG: log_icp_queries	on|off
#	If set, ICP queries are logged to access.log. You may wish
#	do disable this if your ICP load is VERY high to speed things
#	up or to simplify log analysis.
#
#log_icp_queries on

#  TAG: icp_hit_stale	on|off
#	If you want to return ICP_HIT for stale cache objects, set this
#	option to 'on'.  If you have sibling relationships with caches
#	in other administrative domains, this should be 'off'.  If you only
#	have sibling relationships with caches under your control, then
#	it is probably okay to set this to 'on'.
#
#icp_hit_stale off

#  TAG: minimum_direct_hops
#	If using the ICMP pinging stuff, do direct fetches for sites
#	which are no more than this many hops away.
#
#minimum_direct_hops 4

#  TAG: cachemgr_passwd
#	Specify passwords for cachemgr operations.
#
#	Usage: cachemgr_passwd password action action ...
#
#	valid actions are:
#		shutdown *
#		info
#		objects
#		vm_objects
#		utilization
#		ipcache
#		fqdncache
#		dns
#		redirector
#		io
#		reply_headers
#		filedescriptors
#		netdb
#		server_list
#		client_list
#		config *
#
#	* Indicates actions which will not be performed without a
#	  valid password, others can be performed if not listed here.
#
#	To disable an action, set the password to "disable".
#	To allow performing an action without a password, set the
#	password to "none".
#
#	Use the keyword "all" to set the same password for all actions.
#
#cachemgr_passwd secret shutdown
#cachemgr_passwd lesssssssecret info stats/objects
#cachemgr_passwd disable all

#  TAG: store_avg_object_size	(kbytes)
#	Average object size, used to estimate number of objects your
#	cache can hold.  See doc/Release-Notes-1.1.txt.  The default is
#	13 KB.
#
#store_avg_object_size 13 KB

#  TAG: store_objects_per_bucket
#	Target number of objects per bucket in the store hash table.
#	Lowering this value increases the total number of buckets and
#	also the storage maintenance rate.  The default is 20.
#
#store_objects_per_bucket 20

#  TAG: http_anonymizer
#	If you want to filter out certain HTTP request headers for
#	privacy reasons, enable this option.  There are three
#	appropriate settings:
#		'off'		All HTTP request headers are passed.
#		'standard'	Specific headers are removed
#		'paranoid'	Only specific headers are allowed.
#	To see which headers are allowed or denied, please see the
#	http-anon.c source file.
#
#http_anonymizer off

#  TAG: client_db	on|off
#	If you want to disable collecting per-client statistics, then
#	turn off client_db here.
#
#client_db on

#  TAG: netdb_low
#  TAG: netdb_high
#	The low and high water marks for the ICMP measurement
#	database.  These are counts, not percents.  The defaults are
#	900 and 1000.  When the high water mark is reached, database
#	entries will be deleted until the low mark is reached.
#
#netdb_low 900
#netdb_high 1000

#  TAG: netdb_ping_period
#	The minimum period for measuring a site.  There will be at
#	least this much delay between successive pings to the same
#	network.  The default is five minutes.
#
#netdb_ping_period 5 minutes

#  TAG: query_icmp	on|off
#	If you want to ask your peers to include ICMP data in their ICP
#	replies, enable this option.
#
#	If your peer has configured Squid (during compilation) with
#	'--enable-icmp' then that peer will send ICMP pings to origin server
#	sites of the URLs it receives.  If you enable this option then the
#	ICP replies from that peer will include the ICMP data (if available).
#	Then, when choosing a parent cache, Squid will choose the parent with
#	the minimal RTT to the origin server.  When this happens, the
#	hierarchy field of the access.log will be
#	"CLOSEST_PARENT_MISS".  This option is off by default.
#
#query_icmp off

#  TAG: test_reachability	on|off
#	When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH
#	instead of ICP_MISS if the target host is NOT in the ICMP
#	database, or has a zero RTT.
#
#test_reachability off

#  TAG: buffered_logs	on|off
#	Some log files (cache.log, useragent.log) are written with
#	stdio functions, and as such they can be buffered or
#	unbuffered.  By default they will be unbuffered. Buffering them
#	can speed up the writing slightly (though you are unlikely to
#	need to worry).
#buffered_logs off

#  TAG: reload_into_ims	on|off
#	When you enable this option, client no-cache or ``reload''
#	requests will be changed to If-Modified-Since requests.
#	Doing this VIOLATES the HTTP standard.  Enabling this
#	feature could make you liable for problems which it
#	causes.
#	
#	see also refresh_pattern for a more selective approach.
#
#reload_into_ims off

#  TAG: always_direct
#	Usage: always_direct allow|deny [!]aclname ...
#
#	Here you can use ACL elements to specify requests which should
#	ALWAYS be forwarded directly to origin servers.  For example,
#	to always directly forward requests for local servers use
#	something like:
#
#		acl local-servers dstdomain my.domain.net
#		always_direct allow local-servers
#
#	To always forward FTP requests directly, use
#
#		acl FTP proto FTP
#		always_direct allow FTP
#
#	NOTE: There is a similar, but opposite option named
#	'never_direct'.  You need to be aware that "always_direct deny
#	foo" is NOT the same thing as "never_direct allow foo".  You
#	may need to use a deny rule to exclude a more-specific case of
#	some other rule.  Example:
#
#		acl local-external dstdomain external.foo.net
#		acl local-servers dstdomain  foo.net
#		always_direct deny local-external
#		always_direct allow local-servers
#
#	This option replaces some v1.1 options such as local_domain
#	and local_ip.

#  TAG: never_direct
#	Usage: never_direct allow|deny [!]aclname ...
#
#	never_direct is the opposite of always_direct.  Please read
#	the description for always_direct if you have not already.
#
#	With 'never_direct' you can use ACL elements to specify
#	requests which should NEVER be forwarded directly to origin
#	servers.  For example, to force the use of a proxy for all
#	requests, except those in your local domain use something like:
#
#		acl local-servers dstdomain foo.net
#		acl all src 0.0.0.0/0.0.0.0
#		never_direct deny local-servers
#		never_direct allow all
#	
#	or if squid is inside a firewall and there is local intranet
#	servers inside the firewall then use something like:
#
#		acl local-intranet dstdomain foo.net
#		acl local-external dstdomain external.foo.net
#		always_direct deny local-external
#		always_direct allow local-intranet
#		never_direct allow all
#	
#	This option replaces some v1.1 options such as inside_firewall
#	and firewall_ip.

#  TAG: fake_user_agent
#	If you use the paranoid http_anonymizer setting, Squid will strip
#	your User-agent string from the request.  Some Web servers will
#	refuse your request without a User-agent string.  Use this to
#	fake one up.  For example:
#
#	fake_user_agent Nutscrape/1.0 (CP/M; 8-bit)
#	(credit to Paul Southworth pauls@etext.org for this one!)
#
#fake_user_agent none

#  TAG: icon_directory
#	Where the icons are stored. These are normally kept in
#	/usr/local/squid/etc/icons

#  TAG: error_directory
#	If you wish to create your own versions of the default
#	(English) error files, either to customise them to suit your
#	language or company copy the template english files to anther
#	directory and point this tag at them.

#  TAG: minimum_retry_timeout	(seconds)
#	This specifies the minimum connect timeout, for when the
#	connect timeout is reduced to compensate for the availability
#	of multiple IP addresses.
#
#	When a connection to a host is initiated, and that host has
#	several IP addresses, the default connection timeout is reduced
#	by dividing it by the number of addresses.  So, a site with 15
#	addresses would then have a timeout of 8 seconds for each
#	address attempted.  To avoid having the timeout reduced to the
#	point where even a working host would not have a chance to
#	respond, this setting is provided.  The default, and the
#	minimum value, is five seconds, and the maximum value is sixty
#	seconds, or half of connect_timeout, whichever is greater and
#	less than connect_timeout.
#
#minimum_retry_timeout 5 seconds

#  TAG: maximum_single_addr_tries
#	This sets the maximum number of connection attempts for a
#	host that only has one address (for multiple-address hosts,
#	each address is tried once).
#
#	The default value is three tries, the (not recommended)
#	maximum is 255 tries.  A warning message will be generated
#	if it is set to a value greater than ten.
#
#maximum_single_addr_tries 3

#  TAG: snmp_port
#	Squid can now serve statistics and status information via SNMP.
#	By default it listens to port 3401 on the machine. If you don't
#	wish to use SNMP, set this to '-1'.
#
#	NOTE: SNMP support requires use the --enable-snmp configure
#	command line option.
#snmp_port 3401

#  TAG: snmp_do_queueing
#	If disabled, snmp packets will not be queued but delivered
#	immediately. This could be useful when you want to monitor a
#	cache in trouble, but this could also make Squid block, slowing
#	connections and possibly worsening the cache status.
#snmp_do_queueing on

#  TAG: forward_snmpd_port
#	This configures whether we should be forwarding SNMP requests
#	to another snmpd. The reason for putting this piece of
#	functionality into Squid was to enable access to the system's
#	installed snmpd with minimal changes.  This option is turned
#	off by default, check with your /etc/services for your system's
#	snmp port (usually 161).  We do not use getservbyname() to
#	allow you to set Squid into port 161 and your system's snmpd to
#	another port by changing /etc/services.
#
#	WARNING: Because of Squid acting as a proxy snmpd for system
#	you have to do security checks on THIS snmpd for all objects.
#	Check your snmp_config_file.
#forward_snmpd_port 0

#  TAG: snmp_mib_path
#	The location of Squid's mib.
#snmp_mib_path /usr/local/squid/etc/mib.txt

#  TAG: trap_sink
#	Hostname or ip address of trap sink for snmp
#trap_sink 127.0.0.1

#  TAG: snmp_trap_community
#	Community name for traps.
#snmp_trap_community public

#  TAG: snmp_enable_authen_traps
#	Enable SNMP authenticated traps. Set to 'off' or 'on'.
#snmp_enable_authen_traps off

#  TAG: snmp_agent_conf
#	Define snmp views, users and communities 
#	Example:
#		snmp_agent_conf view all .1.3.6	included
#		snmp_agent_conf view squid .1.3.6 included
#		snmp_agent_conf user squid - all all public
#		snmp_agent_conf user all all all all  squid
#		snmp_agent_conf community public squid squid
#		snmp_agent_conf community readwrite all all

#  TAG: snmp_acl
#	Define access controls per community:
#	snmp_access communityname allow|deny [!]aclname ...
#	Example:
#		snmp_acl public allow adminsubnet
#		snmp_acl public deny all

#  TAG: snmp_incoming_address
#  TAG: snmp_outgoing_address
#	Just like 'udp_incoming_address' above, but for the SNMP port.
#
#	snmp_incoming_address	is used for the SNMP socket receiving
#				messages from SNMP agents.
#	snmp_outgoing_address	is used for SNMP packets returned to SNMP
#				agents.
#
#	The default behaviour is to not bind to any specific address.
#
#	NOTE, snmp_incoming_address and snmp_outgoing_address can not have
#	the same value since they both use port 3130.
#
#snmp_incoming_address 0.0.0.0
#snmp_outgoing_address 0.0.0.0

#  TAG: as_whois_server
#	WHOIS server to query for AS numbers.  NOTE: AS numbers are
#	queried only when Squid starts up, not for every request.


# DELAY POOL PARAMETERS (all require DELAY_POOLS compilation option)
# -----------------------------------------------------------------------------
#
# A general note on delay pools - the first matched delay pool is used,
# that is, if a request falls into class1 then it isn't checked for class2
# or class3 (and similarly a class2 request isn't checked for class3).

#  TAG: delay_class1_access
#	This is used to select what client requests are processed via
#	the first ("class 1") delay pool.  In this delay pool only the
#	aggregate traffic allowance is configurable.

#  TAG: delay_class2_access
#	This is used to select what client requests are processed via
#	the first ("class 2") delay pool.  In this delay pool both the
#	aggregate and per-host traffic allowance are configurable.
#	There are 254 individual delay pools based on the last 8 bits
#	of the client IP address (addresses ending in 0 and 255 are not
#	permitted).

#  TAG: delay_class3_access
#	This is used to select what client requests are processed via
#	the first ("class 3") delay pool.  In this delay pool, the
#	aggregate, network and per-host traffic allowance are
#	configurable.  There are 255 network delay pools based on the
#	17th to 24th bit of the client IP address (network 255 is not
#	permitted), and individual delay pools based on the last 16
#	bits of the client IP address (network 255 and hosts ending in
#	0 and 255 are not permitted).

#  TAG: delay_class1_aggregate_restore	(bps)
#	The number of bytes per second added to the class 1 aggregate
#	delay pool traffic allowance (-1 to disable the delay pool).

#  TAG: delay_class1_aggregate_max	(bytes)
#	The maximum number of bytes which can be in the class 1
#	aggregate delay pool traffic allowance.

#  TAG: delay_class2_aggregate_restore	(bps)
#	The number of bytes per second added to the class 2 aggregate
#	delay pool traffic allowance (-1 to disable the delay pool).

#  TAG: delay_class2_aggregate_max	(bytes)
#	The maximum number of bytes which can be in the class 2
#	aggregate delay pool traffic allowance.

#  TAG: delay_class2_individual_restore	(bps)
#	The number of bytes per second added to the class 2 individual
#	host delay pool traffic allowances (-1 to disable these delay
#	pools).

#  TAG: delay_class2_individual_max	(bytes)
#	The maximum number of bytes which can be in the class 2
#	individual host delay pool traffic allowances.

#  TAG: delay_class3_aggregate_restore	(bps)
#	The number of bytes per second added to the class 3 aggregate
#	delay pool traffic allowance (-1 to disable the delay pool).

#  TAG: delay_class3_aggregate_max	(bytes)
#	The maximum number of bytes which can be in the class 3
#	aggregate delay pool traffic allowance.

#  TAG: delay_class3_network_restore	(bps)
#	The number of bytes per second added to the class 3 8-bit
#	network delay pool traffic allowances (-1 to disable these
#	delay pools).

#  TAG: delay_class3_network_max	(bytes)
#	The maximum number of bytes which can be in the class 3 8-bit
#	network delay pool traffic allowances.

#  TAG: delay_class3_individual_restore	(bps)
#	The number of bytes per second added to the class 3 individual
#	host delay pool traffic allowances (-1 to disable these delay
#	pools).

#  TAG: delay_class3_individual_max	(bytes)
#	The maximum number of bytes which can be in the class 3
#	individual host delay pool traffic allowances.

#  TAG: incoming_icp_average
#  TAG: incoming_http_average
#  TAG: min_icp_poll_cnt
#  TAG: min_http_poll_cnt
#	Heavy voodoo here.  I can't even beleve you are reading this.
#	Are you crazy?  Don't even think about adjusting these unless
#	you understand the algorithms in comm_select.c first!
#
#incoming_icp_average 6
#incoming_http_average 4
#min_icp_poll_cnt 8
#min_http_poll_cnt 8

#  TAG: max_open_disk_fds
# You can use the inside_firewall directive in squid.conf to specify a list of domains internal to your Internet firewall.
inside_firewall deere.com