Re: ipchains redirect problem

         You surely need to 'prepare' Squid for what´re doing. That´s
called Transparent Proxying.

         Try finding on your squid.conf file the following statements, and
modifying them to match this:

httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy on
httpd_accel_uses_host_header on

         Then, restart squid and there it goes !!!! Transparent Proxying
Working !!!!!

At 13:48 28/06/00 -0400, robr wrote:
>Hi all,
>
>The following rule doesnt catch port 80 traffic and send to squid on 3128
>
>/sbin/ipchains -A input -p tcp -s ext.ip.address.0/24 -d 0/0 80 -j
>REDIRECT 3128
>
>I have two nic's, one with ext.ip.addres.9 and one with a private internal
>address of 192.168.1.1, both are class c. I'm using Red Hat 6.2 with a non
>modified kernel. From a workstation on the lan I can browse out as long as
>the proxy settings are configured for IE5 (192.168.1.1 and port
>3128). The workstation is configured to use 192.168.1.1 as the gateway.
>If I add the following chain it will work, but still I dont believe that
>the traffic is getting redirected to squid:
>ipchains -A forward -s 192.168.1.0/24 -d 0.0.0.0/0 -j MASQ
>
>Ip forwarding is enabled. Do I need any chains other than the REDIRECT?
>I'm assuming squid is ok since it works with manual proxy config.
Received on Wed Jun 28 2000 - 12:38:10 MDT