Re: [SQU] squid does not cache any objects

Hi Hoomaan,

I already had lines "hierarchy_stoplist domain.com" (yahoo.com, hotmail.com, etc). If I run transparent mode (I removed the proxy information from browser), problem was happen. Although I put "hierarchy_stoplist" line, it did not help......

Problem is not happen if I tell the proxy address and port to my browser (it means that I run non-transparent) except Hotmail. That is why my "hierarchy_stoplist" is directed for HOTMAIL.COM. Yahoo or others WEB are OK in non-transparent mode without "hierarchy_stoplist".

Some people suggest me to forward the SSL packet to Squid. Do you forward your SSL to Squid? If negative....it is better, because I will be easier to isolate the problem source.

My system is Redhat 6.2 (kernel 2.2.14), Cisco 2610 with IOS 12.0.(7), Squid 2.3STABLE4.

Please advise. Thx

Best Regards,
 
Awie
awie@eksadata.com
PT. EKSADATA INTISOLUSI
Phone : (62-361) 261514
Mobile1 : (62-82) 3610369
Mobile2 : (62-818) 346241
  ----- Original Message -----
  From: Hoomaan Naimi
  To: Awie ; squid-users@ircache.net
  Sent: Thursday, October 19, 2000 11:18 PM
  Subject: Re: [SQU] squid does not cache any objects

  Try adding this line to your squid.conf :

  hierarchy_stoplist yahoo.com

  Does the problem eliminates?

  Best Regards
  Hoomaan Naimi
  Afranet Network Administrator
    ----- Original Message -----
    From: Awie
    To: Hoomaan Naimi ; squid-users@ircache.net
    Sent: Thursday, October 19, 2000 4:54 PM
    Subject: Re: [SQU] squid does not cache any objects

    Hi Hoomaan,

    Does your transparent cache running well when users go to Yahoo mail (or similar)? I got problem if I force the transparent.

    After users inputing their username and password, the WEB looping to ask username and password again. If I use non-transparent, it runs OK.

    Do you have any idea?

    Thx

    Best Regards,

    Awie
    awie@eksadata.com
    PT. EKSADATA INTISOLUSI
    Phone : (62-361) 261514
    Mobile1 : (62-82) 3610369
    Mobile2 : (62-818) 346241
      ----- Original Message -----
      From: Hoomaan Naimi
      To: squid-users@ircache.net
      Sent: Monday, October 16, 2000 9:59 PM
      Subject: [SQU] squid does not cache any objects

      Hi all,
      I have installed a squid transparent proxy on RedHat Linux. But it does not cache any objects. When I check the store.log, all file numbers are equal to FFFFFFFF with a RELEASE ,i.e. the object existed only on memory and was released from memory. Cache hit rates are as low as 3% and even negative and all cache result codes at access.log are TCP_MISS with a DIRECT peer status code. Does anybody have an idea about the problem?
        
      Best Regards
      Hoomaan Naimi
      Afranet Network Administrator

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html